微電子技術研究所介紹-中英對照
East China Micro-electronics Technology Research Institute
華東微電子技術研究所是中國從事微電子技術研究的國家一類研究所，主要從事厚膜、薄膜混合集成技術（HIC）、多芯片組件技術以及相關電子材料、電路及專用設備的研究和制造。 East China Micro-electronics Technology Research Institute is China’s national first-class research institute which is mainly engaged in researching and producing of thick-film, thin-film hybrid IC (HIC), multi-chip module technology and related electronic material, circuit and manufacturing equipments. 我所已通過ISO9000質量管理體系認證，擁有國內領先的多芯片組件（MCM）、厚膜混合集成電路、薄膜混合集成電路以及金屬封裝外殼等四條研制生產線，混合集成電路可滿足GJB2438A-2000《混合集成電路通用規范》H級要求（相當于MIL-PRF-38534的H級）。 We have already obtained ISO9000 Quality Management System Certificate, and have four research and product line, including MCM, thick-film hybrid integrated circuits, thin-film hybrid integrated circuits, and metal package, which are of the lead position in domestic level. Hybrid integrated circuits is meeting H-level requirements of GJB2438A–2000. (“General Specification of Hybrid Integrated Circuits”)(Equivalent to H-level of MIL-PRF-38534)
我所研制生產的產品有功率電路（包括DC/DC、AC/DC、DC/AC、EMI濾波器、脈寬調制放大器）、轉換器電路（SDC/RDC、DRC/C、F/V、I/F變換器）、精密基準電路（電壓基準源、精密恒流源）、信號處理電路、放大器電路、專用混合集成電路、多芯片組件、厚膜工藝設備以及相關電子材料等，廣泛應用于工業領域高可靠的電子設備中。
Our products include power circuits (including DC/DC, AC/DC, DC/AC, EMI filters, pulse width modulation amplifier), the converter circuits (SDC/RDC, DRC/ C, F/V, I/F converter), precision benchmark circuits (voltage reference, precision constant current source), signal processing circuit, amplifier circuit, hybrid integrated circuits, MCM, thick-film technological equipment and related electronic equipment, which are widely used in industrial highly reliable electronic devices.
電路類:
Circuit
1.第一代DC/DC變換器（厚膜電路）
DC/DC變換器產品經過二十多年的不斷完善,目前已形成系列化、標準化、供貨批量化。
產品特點：
1、采用PWM推挽式技術
2、工作頻率：200kHz~300kHz(恒頻)
3、輸入電壓：18V~36V
4、輸出功率：5W、15W、30W、50W、70W、200W
5、具有禁止、短路保護等輔助功能。
6、工作溫度：-55℃~105℃
7、厚膜混合集成工藝，裸芯片組裝，全密封金屬封裝。
1. First-generation DC/DC Converter (thick-film circuit)
After more than 20 years of continuous improvement, DC/DC converter products currently are serialized, standardized and available for mass supply.
Features:
1. Using PWM push-pull technology.
2. Working frequency: 200 kHz~300 kHz (Constant Frequency).
3. Input voltage: 18 V~36V.
4. Output power: 5W, 15W, 30W, 50W, 70W, 200W
5. Auxiliary functions such as prohibit, short-circuit protection.
6. working temperature: -55℃~105℃.
7. thick-film hybrid integration technology, bare chip assembly, whole-sealed metal package.
2.第二代DC/DC變換器
產品特點：
1、采用單端式PWM與諧振磁復位技術
2、工作頻率：400kHz~600kHz(恒頻)
3、輸入電壓：16V~40V
4、輸出功率：5W、15W、20、30W、50W、65W
5、具有禁止、短路保護、外同步等輔助功能
6、工作溫度：-55℃~125℃
7、厚膜混合集成工藝，裸芯片組裝，全密封金屬封裝
8、質量等級為H級
2. Second-generation DC/DC Converter
Features:
1. Using single-ended PWM and magnetic reset technology
2. Working frequency: 400 kHz~600 kHz (Constant Frequency)
3. Input voltage: 16V~40V
4. Output power: 5W, 15W, 20, 30 W, 50W, 65W
5. Auxiliary functions such as prohibit, short-circuit protection, external synchronization
6. working temperature: -55℃~125℃
7. thick-film hybrid integration technology, bare chip assembly, whole-sealed metal package
8. with quality level of Class H
3、EMI電源濾波器
產品特點：
1、輸入電壓：16V~40V
2、輸出電流：最大可達7A
3、產品抗γ總劑量輻射能力達3×105rad(si)
4、電磁兼容特性符合GJB151A-97之CE102要求(相當于MIL-STD-461C之CE03)
5、厚膜混合集成工藝，全密封金屬封裝結構
6、質量等級為H級
3. EMI Power Filter
Features:
1. Input voltage: 16V~40V
2. Output current: 7A Maximum
3. Total dose of resist γ radiation capacity: 3×105rad (si)
4. Electromagnetic compatibility meeting CE102 of GJB151A-97 requirements (equivalent of CE03 of MIL-STD-461C)
5. thick-film hybrid integration technology, whole-sealed metal package
6. with quality level of Class H
4.軟開關大功率DC/DC變換器
1、ZCS/ZVS軟開關技術，最大工作頻率：1MHz
2、輸入電壓：18V~36V
3、工作溫度：-55℃~105℃
4、輸出功率：50W~200W
5、具有同步功能，支持并聯擴流。
6、采用模塊式
7、兼容vicor同類產品。
4. Soft-switching high-power DC/DC Converter
1. ZCS/ZVS soft-switching technology, the maximum working frequency: 1MHz
2. Input voltage: 18V~36V
3. working temperature: -55℃~105℃
4. Output power: 50W~200W
5. Synchronization function, support paralleling to expand flow.
6. Modular
7. Compatible with vicor and similar products
5.旋轉變壓器/自整角機-數字轉換器
軸角-數字轉換器系列產品主要應用于角度、位置的測量和控制。這類產品已研制生產了二十多年，有模塊式和混合集成式兩種結構類型，已形成比較完善的系列產品，具體有下列兩類：
5. Resolver/Synchro-Digital Converter
Resolver-digital converter series products are mainly used in measurement and control of perspective and location. Such products has been researched and produced for more than 20 years, including two types-- modular structure and hybrid integrated structure. We have formed a fairly complete series of products, specifically the following two categories:
A、SDC/RDC自整角機/旋轉變壓器-數字轉換器
產品特點：
1、激磁頻率0-2.6 kHz任選
2、分辨率12位、14位、16位
3、精度：±8分、±4分、±2分
4、對非標輸入可使用外部電阻衰減
5、具有VeL輸出、內部差動隔離輸入、三態鎖存輸出
A. SDC/RDC Synchro / Resolver -Digital Converter
Features:
1. Excited magnetic frequency: 0-2.6 kHz optional
2. Resolution: 12, 14, 16
3. Accuracy: ± 8, ± 4, ± 2
4. Can use external resistor attenuation for non-standard input
5. With VeL output, internal isolated differential input and three-state latch output
B、DSC/DRC系列數字-自整角機/旋轉變壓器轉換器
產品特點：
1、與DTL/TTL/CMOS電平兼容
2、分辨率12位、14位、16位、19位
3、短路和過載保護
4、內部帶有功放電路，輸出功率達1.5W/5W
B. DSC/DRC Series Digital-Synchro / Resolver Converter
Features:
1. Compatible with DTL/TTL/CMOS level
2. Resolution: 12, 14, 16, 19
3. Short-circuit protection and overload protection
4. With internal power amplifier circuit, output power of 1.5W/5W
6、激勵源（DC/AC電源）
產品特點：
1、輸入電壓：±15V或＋28V
2、輸出頻率：50Hz-2.6 kHz±2%
3、輸出電壓2V、6V、11.8V、26V、36V、115V及其它
4、輸出波形質量高、失真度小＜3%、5%(115V)
5、輸出功率1.8W、5W、10W、20W、50W
6. Excitation Source (DC/AC power)
Features:
1. Input voltage: +28V or ± 15V
2. Output frequency: 50Hz-2.6 kHz ± 2%
3. Output voltage: 2V, 6V, 11.8V, 26V, 36V, 115V, etc.
4. High quality of output wave with small distortion <3%, 5% (115V)
5. Output power: 1.8W, 5W, 10W, 20W, 50W
7. 任意比速雙速轉換器
產品特點：
1、激磁頻率0-2.6kHz
2、最高分辨率20位
3、高精度4秒
4、速比可調(1:8、1:16、1:32、1:64)
5、三態鎖存輸出
7. Double-speed Converters with arbitrary velocity
Features:
1. Excited magnetic frequency: 0-2.6kHz
2. Highest resolution: 20
3. High precision: 4 seconds
4. Adjustable speed ratio (1:8, 1:16, 1:32, 1:64)
5. three-state latch output
8.電壓基準源(薄膜電路)
產品特點:
1、基準電壓范圍：±2.5V～±10V
2、高穩定性(溫度系數最高可達0.5 ppm/℃)
3、高精度（0.2%-0.1%）
4、小體積、低功耗
5、多功能(多路輸出、正負對稱跟蹤輸出、可編程)
6、可選擇溫控技術
7、質量等級為H級
8. Voltage Reference Source (thin-film circuits)
Features:
1. reference voltage range: ± 2.5V～± 10V
2. high stability (temperature coefficient up to 0.5 ppm /℃)
3. High precision (0.2% -0.1%)
4. Small size, low power consumption
5. Multifunctional (multi-output, plus-minus symmetric tracking output, programmable)
6. Optional temperature control technology
7. with quality level of Class H
9.電流基準源(恒流源)
產品特點:
1、基準電流范圍：±1～±60mA；
2、啟動穩定時間短(1.5min)；
3、高精度（對稱性≤±0.1%）；
4、低溫漂≤8 ppm/℃；
5、低時漂30 ≤ppm；
6、對稱跟蹤性(正負路電流對稱并跟蹤)；
7、可選擇溫控技術；
8、質量等級為H級。
9. Current Reference Source (Constant current source)
Features:
1. reference current range: ± 1～± 60mA;
2. Short starting time (1.5 min);
3. High precision (symmetry ≤ ± 0.1%);
4. low temperature drift ≤ 8 ppm /℃;
5. Low time drift, ≤ 30ppm;
6. Symmetric tracking (plus-minus current symmetric and tracking);
7. Optional temperature control technology;
8. with quality level of Class H
10、納秒脈沖發生器(HPG296)
產品特點:
1、通電后產生一定時序的三路脈沖；
2、脈沖前后沿≤4ns；
3、脈沖寬度A路為43~53 ns，B、C路為90~110 ns（g根據需要，可在100 ns以內任意設定）；
4、重復頻率由外接晶振確定（≤1MHz）；
5、輸出脈沖幅度為TTL電平
6、質量等級為H級。
10. Nanosecond Pulse Generator (HPG296)
Features:
1. Crating three-way pulse with a certain timing after electrified
2. leading-legging edge of the pulse ≤ 4 ns;
3. Pulse width: A channel 43 ~ 53 ns, B, C channel 90 ~ 110 ns (can be set within 100ns as needed);
4. Repetition frequency determined by external crystal oscillator (≤ 1 MHz);
5. Output pulse amplitude is TTL level
6. with quality level of Class H;
11、電荷放大器（HCA2）
產品特點：其原理是將接收的電荷輸入信號，轉換成電壓信號，使加速度計等傳感元件產生的電荷轉換成電壓。該電路采用薄膜混合集成工藝、裸芯片組裝。金屬全密封圓形外殼封裝。技術指標高，體積小，重量輕。工作溫度-55℃～125℃，質量等級為H級。
11. Charge amplifier (HCA2)
Features:
 Its principle is the amplifier will receive input charge signals, convert them into voltage signals, so as to let sensor components such as accelerometer create charges and convert them into voltage. The circuit makes use of thin-film hybrid integrated technology, bare chip assembly. It is packed with whole-sealed circular metal shell, with high technical specifications, small size and light weight. Working temperature is -55℃～125℃, with quality level of Class H

2012.12.21