Passenger door is single fan pneumatic outer swing door, in the front of the bus.
The use and control of the passenger door outside.
-------Insert the key into the lock hole and rotate clockwise by 90 degrees;
------Turn the handle, rotate clockwise by 90 degrees, open the mechanical lock and pull
out the key;
-------Press the switch of remote key (on stands for open, off for closed), when gas
pressure of the door in the path meets working air pressure（0.6 ~ 0.8Mpa）, the door can
be opened or closed;
-------Press the switch of remote key (on stands for open, off for closed), when gas
pressure of the door in the path cannot meet working air pressure（0.6 ~ 0.8Mpa）, turn the
red button near the passenger door to off, you can open the front door manually;
-------Rotating arm needs adjusting properly after 20000 km, in order to ensure the quality
of the passenger door;
Caption: The first and second steps are not needed, if mechanical lock is unlock.
鎖孔:lock hole 外手柄: outer handle
Figure: Passenger door lock
Warning:
Electrical control pneumatic system is not available, after locking the door using
mechanical lock.
The use and control of passenger door inner bus
--------Rotate the inner handle of mechanical lock retrograde by 90 degree to unlock;
--------Press the on-off switch for passenger door on instrument desk, when gas pressure of
the door in the path meets working air pressure（0.6 ~ 0.8Mpa）, the door can be opened or
closed;
--------Press the on-off switch for passenger door on instrument desk, when gas pressure of
the door in the path（< 0.6Mpa）is not satisfied , turn the red hand pulling discharging
switch above the passenger door inner bus to off, you can open the front door manually;
Figure: Handle of mechanical lock inside
Figure: On-off switch for passenger door on instrument desk 關門:close 開門:open
Figure: Hand pulling discharging switch above the passenger door
0. Vehicle identification 1.Operation 2.Driving
3. Maintenance 4. Do-it-yorselfery 5.Safety
6. Technical data 7. Malfunction 8. Auto parts and Engineering change 9.Storage
and Transport
The driver’s window
The driver’s window is push-pull window in structure form.
The use and control of push-pull driver’s window
-------Gently press the nylon lock in the side window to separate the lock hook and slot,
and pull forward or backward to open the side window.
Figure: Lock of push-pull driver’s window
0. Vehicle identification 1.Operation 2.Driving
3. Maintenance 4. Do-it-yourself 5.Safety
6. Technical data 7. Malfunction 8. Auto parts and Engineering change 9.Storage
and Transport
埃塞俄比亞聯邦民主共和國 埃歷時間：2005年4月22日
貿易部 文件號：030/2/11022/13885
To: C.H. CLINKER MANUFACTURER PLC
ADDIS ABABA
致：CH熟料制造有限公司
亞迪斯亞貝巴
Subject: Confirmation Letter
主題：確認信
As per your request to issue you a letter Confirming C.H CLINKER MANUFACTURER PLC Information on our file, we would like to confirm that:
根據您關于發布CH孰料制造有限公司在我部檔案信息確認信的請求，我部現將該企業相關信息確認如下：
The company is registered by Ethiopian Investment Agency registration No. EIA-PC01/2853/09 on December 31st, 2009.
該公司于2009年12月31日從埃塞俄比亞投資管理局進行商業登記，登記號碼為EIA-PC01/2853/09。
The Shareholders are:
股東結構為：
|
No. 序號 |
Shareholders’ Name 股東姓名 |
Share Value 股價 |
Share Amount 股份數量 |
Total Amount 總額 |
|
1 |
Guangdong Chuanhui Technology Development Group Ltd 廣東川惠科技發展集團有限公司 |
210,000 |
10,000 |
2,100,000,000 |
|
2 |
Ms. Meifang Chen 陳梅芳女士 |
75,000 |
10,000 |
750,000,000 |
|
3 |
Mr. Haichuan Liu 劉海川先生 |
15,000 |
10,000 |
150,000,000 |
|
Total 總計 |
300,000 |
|
3,000,000,000 |
|
The company’s general manager is Mr. Huaichuan Liu.
該公司總經理為劉海川先生。
The company has got a business license from the Ethiopian Investment Agency with No. EIA-OL/3045/2012 on January 10th, 2012.
該公司于2012年01月10日從埃塞俄比亞投資管理局取得營業執照，執照號碼為EIA-OL/3045/2012。
We hope this will suffice your inquiry.
希望以上可以滿足您的咨詢。
Best Regards,
致敬
Nuredin Mahammed Ibnhim貿易登記與執照指導中心總監
(簽名章，并簽名)
電話號碼 傳真 地址：亞蒂斯亞貝巴-埃塞俄比亞