Femto 的傳輸安全說明書翻譯-中英對照
16.2.4.1. Femto和Femto網關之間的傳輸安全
Femto 基站和 Femto 安全網關之間須采用 IPSec 技術為數據提供機密性和完整性保護。
16.2.4.2. Femto和Femto網管之間的傳輸安全
Femto 基站和 Femto 網管之間須采用 IPSec 技術為數據提供機密性和完整性保護。
16.3.設備安全性
符合 YD/T 965-1998  《電信終端設備的安全要求和試驗方法》中的相關規定。
16.4.過電壓過電流
應滿足 YD/T1082-2000《接入網設備過電壓過電流防護及基本環境適應性技術條件》規 定的要求。
16.5.電磁兼容性
應滿足 YD/T1082-2000《接入網設備過電壓過電流防護及基本環境適應性技術條件》規 定的要求。
16.6.3C 認證
用戶端設備應經過有關檢測機構的“3C”認證，用戶端設備上應具有“3C”認證的相關標 識。
中國聯通家庭網關技術規范分冊——Femto 家庭網關
附錄 A  文檔編制歷史
完稿時間 版本說明 修改說明
2009年1月16日 初稿
2009年1月23日 修訂稿 1、格式修改
2、第2章，刪除文中沒有引用 的規范
3、增加縮略詞
4、4.2節，修改架構圖以及描 述
5、5.10.1.8節，協議引用錯誤
6、5.10.6.1  描述錯誤,已修改
7、5.10.6.3  描述錯誤,已修改
8、7.2節，刪除引用的協議
9、10.6.1.5.2.1節，編輯錯誤， 補充一個描述
10、10.6.3.2  刪除多徑環境2-4
11、11.3.1  流程第一步描述
12、11.4.1  流程描述
13、13章帶寬表格和QoS描述
14、15.4指示燈要求—Femto
狀態指示
15、15.8整機功耗改為30W
16、16章，增加可選操作系統
17、17.2.4.1節，修改編輯錯 誤
中國聯通家庭網關技術規范分冊——Femto 家庭網關
18、融合網關改為家庭網關
19、1章改為家庭網關系列規 范
20、5.10.7  增加一種指示方式
2009年2月11日 第二次修訂 1、統一網關名稱為Femto家庭 網關
2、修改圖4-1內容和圖4-2表 示
3、加入批注，相關具體技術 問題待測試后規定
2009年2月16日 第三次修訂 1、加入遠程管理部分內容（包 括正文和附錄部分內容）
2、設備形態加入Femto按鈕要 求
3、硬件能力要求做修正
4、WCDMA系統內切換加注 釋（參數待討論）
5、上電時間做修正
附錄 B PPPoE 代理實現流程
B.1  業務場景
對于家庭用戶來說，家庭的所有成員可能會被分組，對不同的分組有不同的上網限制。比 如成年人和未成年人的上網限制是不一樣的。通過為這些不同的分組分配帳號來實現不同的上 網限制。對于一個有兩個成年人和兩個未成年人的家庭來說可能的上網情況如下：
中國聯通家庭網關技術規范分冊——Femto 家庭網關
未 成年甲
PC2
家庭網關
帳號 2
未 成年乙
PC3
帳號 2
B.2 PPPoE 功能描述
PPPoE 完成以下功能處理：
（1）網關能夠監控來自 LAN/WLAN 側的 PPPoE 呼叫；
（2）網關能夠為 LAN/WLAN 側的呼叫分配 session 連接；
（3）網關需要管理同一個帳號在 LAN/WLAN 側的多個 session 和 WAN 側一個 session 的 對應關系。該對應關系包括：會話建立，會話拆除、雙向路由；
（4）網關需要管理 LAN 側撥號請求的地址分配，使用的地址池和 DHCP Server 是同一個 地址池，以防止 PPPoE 代理功能和 DHCP Server 功能同時啟用的時候產生地址沖突。
16.2.4. The transmission safety of Femto
16.2.4.1. The transmission safety between Femto and Femto gateway
Between the Femto base station and Femto gateways safety, it is required to adopt IPSec technology to provide confidentiality and integrality protection for data.
16.2.4.2. The transmission safety between Femto and Femto network management
Between Femto base station and Femto network management, it is required to adopt IPSec technology to provide confidentiality and integrality protection for data.
16.3. Equipment security
In accordance with the relevant regulation of YD/T 965-1998 of “the security requirements for telecommunication terminal device and test method”;
16.4. Over-voltage and over-current
In accordance with the relevant regulation of YD/T 1082-2000 of “Technical requirements for the prttection against overvoltages and voercurrents and he suitability in basic environmetn on access network equipment”;
16.5. Electromagnetic compatibility
In accordance with the relevant regulation of YD/T 1082-2000 of “Technical requirements for the prttection against overvoltages and voercurrents and he suitability in basic environmetn on access network equipment”;
16.6.3 C authentication
Customer Premise Equipment shall subject to the“3C”authorization of relevant organization; customer Premise Equipment shall have relevant mark of“3C”authorization.
17. Appendix
Appendix A: Record of documentation
 Date for accomplishment  Edition statement Revised comment

January 16, 2009 First draft 
January 23, 2009 Revised draft
1. Reformatting
2. Chapter 2, delete the unquoted regulations in the article; 
3.Increase abbreviations;
4. Chapter 4.2, revise architecture diagrams and description;
5. Chapter 5.10. and 1.8, misquotation of agreement;
6. Chapter 5.10. and 6.1 Error Description; modified;
7. Chapter 5.10. and 6.3 Error Description; modified;
8. Chapter 7.2, delete the quoted agreement;
9. Chapter 10.6.1. and 5.2.1, edit error; add a supplementary description;
10. Chapter 10.6. and 3.2, delete multipath environment 2-4;
11. Chapter 11.3.1, description of the first step of procedure;
12. Chapter 11.4.1, procedure description;
13. Chapter 13, form of bandwidth and QoS description;
14. Chapter 15.4, indicator requirements – Femto status indication;
15. Chapter 15.8, overall power consumption changes into 30W;
16. Chapter16, increase the available operating system;
17. Chapter 17.2.4.1, edit error of editor;
18. Merging gateway changed into home gateway
19. Chapter 1 changes into regulation of home gateway relationship; 
20. Chapter 5.10.7 adds one  instruction pattern;
February 11, 2009 Second edition 1. Unify the name of gateway as Femto Home Gateway;
2. Revise content of Fig 4-1. and Fig. 4-2;
 3. Add annotations and the relevant concrete technology  problems shall be stipulated after testing;

February 16, 2009 Third edition 1. Add the content of long-range administration ( including text and contents of appendix)
2. The form of the equipment adds Femto button
3. The capacity of the hardware shall be available for revising;
4. Switch over the explanatory note in WCDMA system (parameter needs further discusses)
5. Revise the power on time;
Appendix B Realization procedure of PPPoE agent
B.1 Business scenario
To family user, all members of the family may be divided into groups; therefore, it is limited that there is different Net surfing for the different grouping. For example Net surfing limit of the adult and minor is different. Through assigning the account number to realize that different limit of Net surfing for these different groups. To the family with two adults and two minors, the possible Net surfing situation is as follows:
B.2 PPPoE function description
PPPoE shall finish the following function processes:
(1) The gateway may control the calling of PPPoE from LAN/WLAN;
(2) The gateway may distribute session connection for the calling of LAN/WLAN;
(3) The gateway needs to manage the several sessions in LAN/WLAN with one account number and shall be corresponding with one session of WAN. This corresponding relation includes: conversation set up, conversation removing and the two-side route;
 (4) The gateway needs to manage the address assignment of the dial requirements of LAN; the used address pool and DHCP Server shall be the same address pool, so as to prevent the conflict of the address while launching at the same time of PPPoE agent and DHCP Server function.

2013.1.20